If you have a basement or crawl space that often floods, sump pump installation can be an excellent investment. It helps prevent damage to your belongings and can even prevent the risk of an electrical fire.
However, it’s a project that should be left to the professionals. Read on Sump Pump Installation Aurora CO to learn more about this crucial home improvement tool.

Sump pumps provide many benefits to homeowners, including flooding prevention, mold and mildew prevention, and even increased home resale value. But the cost of installing and maintaining a sump pump can add up quickly.
The price of a sump pump can vary depending on the location and difficulty of installation. For instance, if the sump pump is being installed in a crawl space or basement that is hard to access, labor costs can be higher than if the sump pump was being installed in a walk-out basement. Similarly, installing a drain system at the pump site will increase costs.
Moreover, installing a sump pump requires digging a hole to install the pump basin and a sump pump line. The type of flooring at the site also impacts installation costs, with concrete floors being more expensive than dirt floors. Installing a battery backup system will also increase the cost.
Professional installation is typically recommended, as it will ensure that the sump pump is properly connected to a power source, and that it has the proper drainage system. An experienced plumber can typically complete the entire project in less than a day. However, if you decide to tackle the project on your own, it is important to consider all of the factors involved. For instance, sump pumps require electrical connections, so the area where you plan to locate your pump should have a ground fault circuit interrupter (GFCI) outlet available. It is also crucial to ensure that you have a septic or sewer connection available, since the pump will be draining waste water directly into those systems.
Other factors that impact the cost of a sump pump include the type and size of pump, extras like battery backup systems, and plumbing upgrades that may be necessary to accommodate the new sump pump. Finally, if your home is on a floodplain, it is likely that you will need to upgrade your sewer or septic system in order to adequately handle the flow of water from the sump pump.
In addition to the cost of materials, you should also budget for the cost of professional installation and any other plumbing or electrical work required to accommodate your sump pump. For example, you might need to hire a contractor to extend your plumbing or electric lines, or to install a new outlet to support the pump and back-up power supply.
Choosing a Pump
A sump pump installation is an excellent investment for homeowners with a basement or crawl space. The pumps prevent flooding, which can be costly and cause damage to valuable belongings. They can also prevent the growth of mould and mildew, which are hazardous to your health. They are especially useful in finished basements, where people tend to store expensive electronics and furniture.
When choosing a sump pump, it is important to consider the size of your basement, the amount of water you expect to drain and your home’s flood risk. You can find the right pump for your needs by determining the size of your basement and how much water it is exposed to during heavy rains. You can also evaluate your home’s risk of flooding by identifying where water, sewer and utility lines enter the house, as well as the lowest point of the home.
The type of sump pump you select will determine how much it costs to install. You can choose from five different types of pumps, each with varying capabilities and features. For instance, you will need to know how many gallons of water the pump can move per hour and to what height it can lift the water. The horsepower of the motor also affects the price, with more powerful pumps costing more.
To ensure a sump pump continues to function properly, you will need to perform regular maintenance and inspections. If you are unsure of how to do this or you are not comfortable with the process, it is best to hire a professional. The professional will assess your home, identify the appropriate pump and complete the necessary installation. They will also provide future maintenance and inspections, which can prolong the life of your sump pump and prevent expensive repairs.
To prevent your sump pump from burning out, it is a good idea to choose a model with an energy-efficient motor. In addition, you should make sure the sump pump is plugged into a power outlet that is not shared with any other electrical appliances. It is also a good idea to choose a model that has a backup battery for power failures.
Installation
Unless you’re comfortable working with electricity and drilling into your home’s foundation, it’s best to let a professional handle sump pump installation. A plumber can ensure the work complies with local codes and that your sump pump is working correctly. In addition, they can also help you decide what type of sump pump is best for your needs.
To prepare for sump pump installation, a plumber will dig a hole at the desired location. They’ll then line the pit with gravel to promote drainage and prevent clogging. The pump will be placed in the pit, and a check valve will be attached to the discharge pipe to stop water backflow. A plumber will also install a GFCI (ground fault circuit interrupter) outlet in the area to prevent electrical shock when working with power near water.
Once the sump pump is operational, it will automatically start to remove water when the float rises to a certain level. Then the impeller will force the water out of the discharge pipe and away from your foundation. This will help to reduce the risk of basement flooding and other water damage. The pump will shut off when the float or pressure sensor detects that the water level is down again, and the process will repeat until the water level rises above the set point.
Because it is a powerful mechanical device, a sump pump will make some noise while running. The noise may be distracting for some people, but it is necessary to protect your property from flooding. You can reduce the amount of noise the sump pump produces by installing it in a remote location away from living areas, such as in a basement crawl space or garage.
Once the pump is finished, a plumber will route the discharge pipe outside your house through the wall of your basement or a small penetration in your exterior foundation. The installer will then bury the discharge pipe outdoors, typically in a ditch or storm drain, and a short distance away from your house’s foundation so that water doesn’t settle right against the structure.
Maintenance
A sump pump is an excellent investment for homes that have flooded in the past or live in floodplains. It also reduces the amount of moisture that accumulates in the home, which can lead to asthma and other respiratory problems. Even homes that don’t experience flooding may benefit from a sump pump installation, as it can help reduce the humidity levels and protect against mold growth.
To maintain your sump pump’s performance, you should schedule professional inspections once a year. During these inspections, the plumber will check for any hidden issues and make any necessary repairs to ensure your sump pump is functioning properly. Keeping up with routine maintenance can help reduce the cost of your sump pump and ensure that it’s working when you need it.
If your sump pump turns on but doesn’t eject the water, it could be due to a malfunctioning impeller or a clogged discharge pipe. A clogged discharge line can prevent the sump pump from properly removing water from your basement, leading to costly damage and a flooded home. If you’re having this problem, the plumber will check for any blockages and ensure that your discharge line is free of debris and pointing far away from your foundation.
Other common sump pump problems include a burned out motor or a stuck float switch. The float switch is designed to lift when the sump pump is activated, so it’s important to make sure that it isn’t clogged or stuck. If you’re having this issue, the plumber will replace or repair your float switch.
During maintenance, the plumber will clean all of the components inside and outside your sump pump. This includes cleaning the impeller, check valve, and discharge pipe. The plumber will also inspect the sump pit for any rust or debris. Some pumps require lubrication, so the plumber will refer to the owner’s manual to see if yours needs to be oiled. In addition, the plumber will clean the discharge line to ensure that it’s directing water far away from your foundation. This will prevent water from returning to the sump pump and causing it to run nonstop.